Deutsch
Español
Français
Italiano
TIMING BELT PULLEYS HTD 3M-06 Z=060
Item No.
03M0660
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Belt Width (mm): | 6 |
| Fastening Type: | Pilot Bore |
| Number of teeth: | 60 |
| Flange: | No |
| Material: | Aluminium |
| Net Weight (Kg): | 0.1 |
BEVEL GEAR PAIRS M. 1,5-A Z=20/20
Item No.
C27A201
DUPLEX SPR. W. HARD.TEETH 3/8X7/32 Z=040
Item No.
PD05T40
HALF-COUPLING W. LARGE TAPE END HRC280 3525
Item No.
HRCE280
PRESTAGE UNIT 080 DM=19/200 DR=24/160 i=3
Item No.
PR080A24
