MULTIBAND V-BELTS SPC 8000 RIB 6
Item No.
MBSPC80006
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 6 |
Type: | Multiband |
Length (mm): | 8.000 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
TIMING BELT PULLEYS ST5-36 Z=019
Item No.
36ST519
TRIPLEX CHAINS 5/8X3/8X10,16 ISO
Item No.
10B3
Spur gears with hardened teeth mod. 4 Z=030
Item No.
PM31T30
TIMING B. PULLEYS TAPER B. HTD 14M-115 Z=080
Item No.
1411080