MULTIBAND V-BELTS SPC 8000 RIB 3
Item No.
MBSPC80003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 3 |
Type: | Multiband |
Length (mm): | 8.000 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
INCHES TAPER BUSHES 1008 BOR. 3/8
Item No.
1000038
TIMING BELT PULLEYS H075 Z=022
Item No.
H075022
TIMING BELT PULLEYS HTD 5M-25 Z=044
Item No.
05M2544
DUPLEX SPROCKETS ASA 60 Z=019
Item No.
PD11A19