MULTIBAND V-BELTS SPC 6000 RIB 6
Item No.
MBSPC60006
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 6 |
Type: | Multiband |
Length (mm): | 6.000 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
DUPLEX PLATEW.FOR TWO SINGLE CH. 16B1 (TL) Z=017
Item No.
DT12017
V-BELT PULLEY POLY-V TAPER PL 200-12
Item No.
LT20012