MULTIBAND V-BELTS SPC 10000 RIB 4
Item No.
MBSPC100004
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 4 |
Type: | Multiband |
Length (mm): | 10.000 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
ALUMINIUM SEMI-COUPLING HUB "A" 38
Item No.
SGAA038
DUPLEX C/IRON TAPER BORED SPR. 1"X17,02 Z=057
Item No.
GD12057
DUPLEX OFFSET LINKS 1"3/4X31 ISO
Item No.
28B2F
SIMPLEX SPROCKETS 1"X17,02 Z=018
Item No.
12SC018