MULTIBAND V-BELTS SPB 2800 RIB 5
Item No.
MBSPB28005
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 5 |
Type: | Multiband |
Length (mm): | 2.800 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
ELECTRIC MOTOR IE3 280M 2P 90KW 400/690V B3
Item No.
C328090X2B3
DUPLEX C/IRON TAPER BORED SPR. 1"1/2X1" Z=038
Item No.
GD14038
DUPLEX TENSIONING PULLEY SP 40-BD
Item No.
RE011814
V-BELT PULLEY F. TAPER B. SPB190-05
Item No.
BT01905