MULTIBAND V-BELTS SPB 2580 RIB 3
Item No.
MBSPB25803
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 3 |
Type: | Multiband |
Length (mm): | 2.580 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
HALF-COUPLING W. LARGE TAPE END HRC70 1008
Item No.
HRCE070
BEVEL GEAR PAIRS M. 1,5-B Z=16/24
Item No.
C27B240
SEMI-COUPLING SHORT HUB "28"
Item No.
SG0C028
SEMI-COUPLING SHORT HUB "19"
Item No.
SG0C019