METRIC TAPER BUSHES 5050 BOR. MM.110
Item No.
5050110
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws. They are designed for use with: Chain sprockets V-belt pulleys Timing belt pulleys Flexible couplings HRC couplings Weld-on hubs NB: the photo on the left is indicative only and
Description
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws.
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Bush | 5050 |
Bore (mm): | 110 |
Material: | Cast iron phosph |
Net Weight (Kg): | 11.3 |
SIMPLEX SPROCKETS 2"X1"1/4 Z=060
Item No.
PS16060
HALF-COUPLING W. LARGE TAPE END HRC230 3020
Item No.
HRCE230
MULTIBAND V-BELTS SPC 8000 RIB 3
Item No.
MBSPC80003
DUPLEX PLATEW.FOR TWO SINGLE CH. 5/8X3/8 Z=020
Item No.
DS10020