INCHES TAPER BUSHES 2012 BOR. 1"3/8
Item No.
2010138
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws. They are designed for use with: Chain sprockets V-belt pulleys Timing belt pulleys Flexible couplings HRC couplings Weld-on hubs NB: the photo on the left is indicative only and
Description
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws.
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Bore range (inches): | 1"3/8 |
Bush | 2012 |
Material: | Cast iron phosph |
Net Weight (Kg): | 0.75 |
CLAMPING PLATES 8M 20
Item No.
PB8M020
TIMING BELT PULLEYS H150 Z=021
Item No.
H150021
V-BELT PULLEY F. TAPER B. SPA250-02
Item No.
AT02502
HALF-COUPLING W. SMALL TAPE END HRC130 1610
Item No.
HRCI130