HTD TIMING BELTS 1190 14M 170 Z=85
Item No.
119014M170
• Available in metric size 3M, 5M, 8M, 14M. 2M and 20M on demand • A hard wearing, flexible top surface protect tension cables • Tension cables made in continuous helically glass fiber • Protective cover fabric with a low coefficient of friction,in order to achieve minimum wear on the
Description
• Available in metric size 3M, 5M, 8M, 14M. 2M and 20M on demand
• A hard wearing, flexible top surface protect tension cables
• Tension cables made in continuous helically glass fiber
• Protective cover fabric with a low coefficient of friction,in order to achieve minimum wear on the contact surfaces, and minimize noise
• Good resistance to oils and greases, and temperature between -25°C and + 100°C
• In line with ISO 5296 norm
• A hard wearing, flexible top surface protect tension cables
• Tension cables made in continuous helically glass fiber
• Protective cover fabric with a low coefficient of friction,in order to achieve minimum wear on the contact surfaces, and minimize noise
• Good resistance to oils and greases, and temperature between -25°C and + 100°C
• In line with ISO 5296 norm
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Type: | Timing Belt HTD |
Width (mm): | 170 |
Number of teeth: | 85 |
Length (mm): | 1.190 |
Material: | Rubber |
Net Weight (Kg): | 1.9825 |
TRIPLEX TAPER-B. SPROCKETS 5/8X3/8 Z=030
Item No.
TT10030
DUPLEX PLATEW.FOR TWO SINGLE CH. 08B1 (TL) Z=025
Item No.
DT09025
DUPLEX SPROCKETS ASA 35 Z=037
Item No.
PD05A37
TIMING B. PULLEYS TAPER B. L100 Z=025
Item No.
TL10025