HTD TIMING BELTS 1080 8M 20 Z=135
Item No.
10808M20
• Available in metric size 3M, 5M, 8M, 14M. 2M and 20M on demand • A hard wearing, flexible top surface protect tension cables • Tension cables made in continuous helically glass fiber • Protective cover fabric with a low coefficient of friction,in order to achieve minimum wear on the
Description
• Available in metric size 3M, 5M, 8M, 14M. 2M and 20M on demand
• A hard wearing, flexible top surface protect tension cables
• Tension cables made in continuous helically glass fiber
• Protective cover fabric with a low coefficient of friction,in order to achieve minimum wear on the contact surfaces, and minimize noise
• Good resistance to oils and greases, and temperature between -25°C and + 100°C
• In line with ISO 5296 norm
• A hard wearing, flexible top surface protect tension cables
• Tension cables made in continuous helically glass fiber
• Protective cover fabric with a low coefficient of friction,in order to achieve minimum wear on the contact surfaces, and minimize noise
• Good resistance to oils and greases, and temperature between -25°C and + 100°C
• In line with ISO 5296 norm
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Type: | Timing Belt HTD |
Width (mm): | 20 |
Number of teeth: | 135 |
Length (mm): | 1.080 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
SIMPLEX SPROCKETS 1/2X5/16 Z=019
Item No.
09SA619
DUPLEX PLATEW.FOR TWO SINGLE CH. 12B1 (TL) Z=018
Item No.
DT11018
TIMING PULLEYS TAPER POLYCHAIN GT 14M-37 Z=168
Item No.
1437168
STD TOOTHED BARS ST-5 Z=040 UL=160
Item No.
BST0540