HTD DOUBLE TOOTHED TIMING BELTS 3500 14M 85 Z=250
Item No.
DD350014M85
• Available in imperial and metric size L, H, 8M, 14M • A hard wearing, flexible top surface protect tension cables • Tension cables made in continuous helically glass fiber . • Protective cover fabric with a low coefficient of friction, in order to achieve minimum wear on the contact
Description
• Available in imperial and metric size L, H, 8M, 14M
• A hard wearing, flexible top surface protect tension cables
• Tension cables made in continuous helically glass fiber .
• Protective cover fabric with a low coefficient of friction, in order to achieve minimum wear on the contact surfaces, and minimize noise
• Good resistance to oils and greases, and temperature between -25°C and + 100°C
• Power transmission and tolerance data are the same of single side belts
• A hard wearing, flexible top surface protect tension cables
• Tension cables made in continuous helically glass fiber .
• Protective cover fabric with a low coefficient of friction, in order to achieve minimum wear on the contact surfaces, and minimize noise
• Good resistance to oils and greases, and temperature between -25°C and + 100°C
• Power transmission and tolerance data are the same of single side belts
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Type: | Double Side Timing Belt HTD |
Width (mm): | 85 |
Number of teeth: | 250 |
Length (mm): | 3.500 |
Material: | Rubber |
Net Weight (Kg): | 3.8675 |
TIMING B. PULLEYS TAPER B. HTD 5M-15 Z=090
Item No.
0515090
HTD TIMING BELTS 2100 14M 170 Z=150
Item No.
210014M170
SIMPLEX SPROCKETS 1"1/2X1" Z=022
Item No.
PS14022
DUPLEX CHAINS 3/8X7/32X6,35 ISO
Item No.
06B2