ZAHNRIEMEN MULTIBAND SPC 7100 RIB 3
Artikel
MBSPC71003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Beschreibung
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
ACHTUNG: Das hier aufgeführtes Bild stellt ausschließlich ein Beispiel dar, und ist auf keine Weise eine technische Angabe. Suchen Sie bitte in unserem Gesamtkatalog nach den kompletten technischen Angaben.
Spezifikationen
Anzahl Bänder: | 3 |
Typ: | Multiband Keilriemen |
Länge (mm): | 7.100 |
Werkstoff: | Gummi |
Nettogewicht (Kg): | N.V. |
ZAHNRIEMENSCHEIBEN HTD 14M-85 Z=038
Artikel
14M8538
FLAT BELTS LP. 1350 (mm.)
Artikel
CP1350
ZWEIF. VERSCHLUSS. GERADE 3/8X7/32X6,35 ISO
Artikel
06B2G
KONISCHE PAARE M. 4,5-B Z=16/16
Artikel
C45B161