ZAHNRIEMEN MULTIBAND SPB 2500 RIB 4
Artikel
MBSPB25004
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Beschreibung
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
ACHTUNG: Das hier aufgeführtes Bild stellt ausschließlich ein Beispiel dar, und ist auf keine Weise eine technische Angabe. Suchen Sie bitte in unserem Gesamtkatalog nach den kompletten technischen Angaben.
Spezifikationen
Anzahl Bänder: | 4 |
Typ: | Multiband Keilriemen |
Länge (mm): | 2.500 |
Werkstoff: | Gummi |
Nettogewicht (Kg): | N.V. |
KEILRIEMENSCH. UNGEBORTH SPC 170-1
Artikel
CM01701
ZAHNSTANGEN FORTLAUF.MONTAGE M.8 80X80X2000
Artikel
CR39200
ZAHNRIEMENSCHEIBEN HTD 5M-09 Z=014
Artikel
05M0914