CORREAS PASO METRICO T2.5-120 A. 06
Artículo
06T25120
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 6 |
Dientes: | 48 |
Desarrollo (mm): | 120 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS TRAP. ESTRECHAS SPA 2582 DES. 2600
Artículo
SPA2582
CORREAS DENTADAS 1200 XXH 200 DES. 3048 Z=96
Artículo
1200XXH200
PINONES SIMPLES 3/4X7/16 Z=024
Artículo
11SD824
P.SIMP. P.TAPER DIENT.TRAT 1"1/4X3/4 Z=013
Artículo
TS13T13