CORREAS PASO METRICO T2.5-1185 A. 08
Artículo
08T251185
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 8 |
Dientes: | 474 |
Desarrollo (mm): | 1.185 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
POLEAS DENT. P. CASQ.CON. H200 Z=019
Artículo
TH20019
MANGUITOS PASO METRICO T10-660 W. 300
Artículo
MT10660
Ruedas cilind. dientes templados mod. 2,5 Z=012
Artículo
PM29T12
POLEAS DENTADAS XH400 Z=028
Artículo
XH40028