CORREAS PASO METRICO T10-1750 A. 50
Artículo
50T101750
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 50 |
Dientes: | 175 |
Desarrollo (mm): | 1.750 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS T10-31 Z=032
Artículo
31T1032
PINONES SIMPLES 3/4X7/16 Z=016
Artículo
11SB416
MANGUITOS DENTADOS 3120-8M Z 390
Artículo
MA31208M
REDUCTOR TSF: VTS 086 P R7 F19 B3
Artículo
VTS08607F19