CORREAS PASO METRICO AT10-1010 A. 16
Artículo
16AT101010
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 16 |
Dientes: | 101 |
Desarrollo (mm): | 1.010 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
POLEAS TRAP. CASQ.CONICOS SPA 80-03
Artículo
AT00803
BARRAS DENTADAS SERIE L-3/8 (AL) Z=016 LU=160
Artículo
B0LA016
CORREAS TRAPECIALES DOBLES AA 150
Artículo
AA150
POLEAS DENTADAS XH200 Z=032
Artículo
XH20032