CORREAS P. METR.DOB.DENT DT10-1350 A. 32
Artículo
32DT101350
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico (dentadura doble) |
Ancho (mm): | 32 |
Dientes: | 135 |
Desarrollo (mm): | 1.350 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
ELEMENTO ELASTICO NEGRO HRC70
Artículo
HRCN070
DISCOS SIMPLES ASA 35 Z=045
Artículo
CS05A45
MOTOR ELÉCTR. IE3 200LB 2P 37KW 400/690V B35
Artículo
C320037X2B35
POLEAS TRAP. CASQ.CONICOS SPA900-02
Artículo
AT09002