CORREAS P. METR.DOB.DENT DT10-1320 A. 32
Artículo
32DT101320
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico (dentadura doble) |
Ancho (mm): | 32 |
Dientes: | 132 |
Desarrollo (mm): | 1.320 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS TRAP. DENTADAS AX 34 DES. 863
Artículo
AX34
CORREAS DENTADAS HTD 711 3M 12 Z=237
Artículo
7113M12
POLEAS DENTADAS HTD 5M-15 Z=014
Artículo
05M1514
PINONES SIMPLES 1/2X1/4X7,75 Z 29
Artículo
PS08029