CORREAS P. METR.DOB.DENT DT10-1250 A. 32
Artículo
32DT101250
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico (dentadura doble) |
Ancho (mm): | 32 |
Dientes: | 125 |
Desarrollo (mm): | 1.250 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS HTD 632 8M 30 Z=79
Artículo
6328M30
DISCOS SIMPLES 1/2X1/8 Z=013
Artículo
CS06013
PARES CONICOS M. 5-B Z=15/45
Artículo
C32B450
CREM. MONTAJE CONTINUO M.4 22X22X2000
Artículo
CR37200