CORREAS MULTIBAND SPC 4250 RIB 3
Artículo
MBSPC42503
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (mm): | 4.250 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS DENT. P. CASQ.CON. HTD 5M-15 Z=048
Artículo
0515048
RUEDA CILINDRICA CON CUBO MOD. 1 Z=014
Artículo
PM26014
PINONES SIMPLES 1"1/4X3/4 Z=013
Artículo
13SD013
DISCOS DOBLES 5/8X3/8 Z=008
Artículo
CD10008