CORREAS MULTIBAND SPC 10000 RIB 6
Artículo
MBSPC100006
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 6 |
Tipo: | Multiband |
Desarrollo (mm): | 10.000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS DENT. CASQ. CON. POLYCHAIN GT 14M-20 Z=48
Artículo
1420048
CORREAS ACANALADAS 1016 J PULG. 40 NERV. 04
Artículo
1016J04
RUEDA EN FUNDICION SIMPLE 1"1/2X1" Z=045
Artículo
RS14045
RUEDA CILINDRICA CON CUBO MOD. 1 Z=053
Artículo
PM26053