CORREAS MULTIBAND SPC 10000 RIB 6
Artículo
MBSPC100006
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 6 |
Tipo: | Multiband |
Desarrollo (mm): | 10.000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
PINONES TRIPLES 3/4X7/16 Z=017
Artículo
PT11017
POLEAS TRAP. CASQ.CONICOS SPA450-03
Artículo
AT04503
PARES CONICOS M. 4-B Z=26/26
Artículo
C31B261
PINONES SIMPLES 1/2X5/16 Z=015
Artículo
09SC215