CORREAS MULTIBAND SPC 10000 RIB 3
Artículo
MBSPC100003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (mm): | 10.000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
RUEDA CILINDRICA CON CUBO MOD. 2 Z=067
Artículo
PM28067
CREM. MONTAJE CONTINUO M.2,5 25X25X500
Artículo
CR29050
PINONES SIMPLES 1"X17,02 Z=018
Artículo
12SB518
PARES CONICOS M. 3-B Z=15/60
Artículo
C30B600