CORREAS MULTIBAND SPB 4250 RIB 7
Artículo
MBSPB42507
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 7 |
Tipo: | Multiband |
Desarrollo (mm): | 4.250 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS DENT.DOBLE DENTADO HTD 1360 8M 20 Z=170
Artículo
DD13608M20
PARES CONICOS M. 1-B Z=26/26
Artículo
C26B261
CORREAS DENT.DOBLE DENTADO HTD 1040 8M 30 Z=130
Artículo
DD10408M30
POLEAS DENT. CASQ. CON. POLYCHAIN GT 14M-20 Z=48
Artículo
1420048