CORREAS MULTIBAND SPB 3350 RIB 4
Artículo
MBSPB33504
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 4 |
Tipo: | Multiband |
Desarrollo (mm): | 3.350 |
Material: | Goma |
Peso Neto (Kg): | 3,1 |
BARRAS DENTADAS SERIE T2,5 Z=012 LU=50
Artículo
BT25012
SEMIACOPLAMIENTO CUBO "B" 45 (AL)
Artículo
SGAB045
REDUCTOR TSF: VI 050 P R50 U
Artículo
VI05050S01
PINONES EN ACERO INOX 5/8X3/8 Z=027
Artículo
PS10X27