CORREAS MULTIBAND SPB 3000 RIB 8
Artículo
MBSPB30008
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 8 |
Tipo: | Multiband |
Desarrollo (mm): | 3.000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS CON DOBLE DENT. 450 H 200 DES.1143 Z=90
Artículo
DD450H200
CORREAS DENTADAS 1520 MXL 025 DES. 386,08 Z=190
Artículo
1520MXL025
POLEAS TRAP. CASQ.CONICOS SPZ450-02
Artículo
ZT04502
POLEAS DENT. CASQ. CON. POLYCHAIN GT 8M-21 Z=36
Artículo
0821036