CORREAS MULTIBAND SPB 2500 RIB 7
Artículo
MBSPB25007
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 7 |
Tipo: | Multiband |
Desarrollo (mm): | 2.500 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
PINONES SIMPLES 3/8X7/32 Z=019
Artículo
05SB519
RUEDA CILIN. SIN CUBO MOD. 1 Z=068
Artículo
CM26068
PARES CONICOS M. 4,5-B Z=22/22
Artículo
C45B221
CORREAS P. METR.DOB.DENT DT10-530 A. 16
Artículo
16DT10530