CORREAS MULTIBAND SPB 2500 RIB 3
Artículo
MBSPB25003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (mm): | 2.500 |
Material: | Goma |
Peso Neto (Kg): | 4 |
CORREAS DENTADAS 1000 MXL 012 DES. 254 Z=125
Artículo
1000MXL012
CORREAS TRAP. CLASICAS Z 40 DES. 1016
Artículo
1016Z40
REDUCTOR TSF: VP 025 P R25 56B14 U
Artículo
VP02525P02
CORREAS TRAP. ESTRECHAS 3V 1120 DES. 2845
Artículo
3V1120