CORREAS MULTIBAND 3V 1000 RIB 2
Artículo
MB3V10002
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 2 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 1000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS CON DOBLE DENT. 750 H 200 DES.1905 Z=150
Artículo
DD750H200
REDUCTOR TSF: VTS 030 P R30 F09 U
Artículo
VTS03030F09
MOT. ÉLECTR. IE1 63C 0,37KW 2P 230/400V B14
Artículo
M10630372B14
CORREAS P. METR.DOB.DENT DT10-1610 A. 16
Artículo
16DT101610