CORREAS DENTADAS 730 H 150 DES. 1854,2 Z=146
Artículo
730H150
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada pulgada |
Desarrollo (pulgadas): | 730 |
Ancho (pulgadas): | 150 |
Dientes: | 146 |
Desarrollo (mm): | 1.854,2 |
Material: | Goma |
Peso Neto (Kg): | 0,3059 |
PINONES SIMPLES 3/8X7/32 Z=024
Artículo
05SA424
POLEAS DENTADAS POLYCHAIN GT 14M-90 Z=40
Artículo
14M90040
SEMIACOPLAMIENTO CUBO "A" 24 (AL)
Artículo
SGAA024
PINONES SIMPLES TEMPLADOS 3/8X7/32 Z=009
Artículo
PS05T09