CORREAS DENTADAS 1250 H 100 DES. 3175 Z=250
Artículo
1250H100
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada pulgada |
Desarrollo (pulgadas): | 1250 |
Ancho (pulgadas): | 100 |
Dientes: | 250 |
Desarrollo (mm): | 3.175 |
Material: | Goma |
Peso Neto (Kg): | 0,3493 |
PINONES TRIPLES ASA 60 Z=017
Artículo
PT11A17
CORREAS TRAP. CLASICAS Z 19 DES. 480
Artículo
480Z19
POLEAS DENTADAS HTD 14M-85 Z=064
Artículo
14M8564
DISCOS SIMPLES 3/4X7/16 Z=031
Artículo
CS11031