TIMING BELTS 730 H 200 DEV.1854,2 Z=146
Item No.
730H200
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Description
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Type: | Timing belt in Inches |
Lenght (inches): | 730 |
Width (inches): | 200 |
Number of teeth: | 146 |
Length (mm): | 1.854,2 |
Material: | Rubber |
Net Weight (Kg): | 0.4079 |
SIMPLEX CHAINS 6X2,8 NICKEL
Item No.
04N1
HALF-COUPLING W. SMALL TAPE END HRC130 1610
Item No.
HRCI130
CLAMPING PLATES 5M 10
Item No.
PB5M10
STD TOOTHED BARS ST-10 Z=021 UL=160
Item No.
BST1021