TIMING BELTS 730 H 150 DEV.1854,2 Z=146
Item No.
730H150
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Description
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Type: | Timing belt in Inches |
Lenght (inches): | 730 |
Width (inches): | 150 |
Number of teeth: | 146 |
Length (mm): | 1.854,2 |
Material: | Rubber |
Net Weight (Kg): | 0.3059 |
HALF-COUPLING W. LARGE TAPE END HRC150 2012
Item No.
HRCE150
SIMPLEX SPROCKETS 3/8X7/32 Z=010
Item No.
05SA110
RACKS FOR CONTINUOUS MOUNT. MOD. 1,5 17X17X2000
Item No.
CR27200
GUIDES FOR TOOTHED BELT F - RPP8 20 mm
Item No.
SF2001URG