TIMING BELT PULLEYS XL037 (AL) Z=010
Item No.
XA37010
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Fastening Type: | Centre Tip |
Number of teeth: | 10 |
Flange: | Yes |
Material: | Aluminium |
Net Weight (Kg): | 0.01 |
OUTPUT FLANGE FC 050
Item No.
FC050
HALF-COUPLING W. LARGE TAPE END HRC90 1108
Item No.
HRCE090
SEMI-COUPLING TAPER BORED I 1615 48/60
Item No.
GTI4860
BEVEL GEAR PAIRS M. 4,5-B Z=15/30
Item No.
C45B300