TIMING BELT PULLEYS HTD 5M-09 Z=020
Item No.
05M0920
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Belt Width (mm): | 9 |
Fastening Type: | Pilot Bore |
Number of teeth: | 20 |
Flange: | Yes |
Material: | Blacksteel |
Net Weight (Kg): | 0.094 |
SEMI-COUPLING TAPER BORED E 1615 48/60
Item No.
GTE4860
WORM GEARBOX: VP 030 P R60 56B14 U
Item No.
VP03060P02
RAW EDGE V-BELTS CX 60 DEV. 1525
Item No.
CX60
TRIPLEX C/IRON TAPER BORED SPR. 3/4X7/16 Z=114
Item No.
GT11114