TIMING BELT PULLEYS HTD 3M-15 Z=032
Item No.
03M1532
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Belt Width (mm): | 15 |
Fastening Type: | Centre Tip |
Number of teeth: | 32 |
Flange: | Yes |
Material: | Aluminium |
Net Weight (Kg): | 0.042 |
TRIPLEX TAPER-B. SPROCKETS 3/4X7/16 Z=057
Item No.
TT11057
DUPLEX PLATEW.FOR TWO SINGLE CH. 1"X17,02 Z=014
Item No.
DS12014
WORM GEARBOX: VP 030 P R100 56B14 U
Item No.
VP030X1P02
TIMING BELT PULLEYS MXL 025 Z=044
Item No.
MXL2544