TIMING BELT PULLEYS HTD 3M-09 Z=018
Item No.
03M0918
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Belt Width (mm): | 9 |
Fastening Type: | Centre Tip |
Number of teeth: | 18 |
Flange: | Yes |
Material: | Aluminium |
Net Weight (Kg): | 0.008 |
RAW EDGE V-BELTS XPA 2000 - 2018
Item No.
XPA2000
WORM GEARBOX: VP 040 P R7.5 63B5 U
Item No.
VP04007P03
DUPLEX PLATEW.FOR TWO SINGLE CH. 5/8X3/8 Z=013
Item No.
DS10013
TIMING BELTS 1000 XXH 500 DEV.2540 Z=80
Item No.
1000XXH500