TIMING BELT PULLEYS HTD 14M-40 Z=144
Item No.
14M4014
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Belt Width (mm): | 40 |
Fastening Type: | Pilot Bore |
Number of teeth: | 144 |
Flange: | No |
Material: | Cast iron phosph |
Net Weight (Kg): | 35 |
HALF-COUPLING W. LARGE TAPE END HRC130 1610
Item No.
HRCE130
TIMING BELT PULLEYS ST5-21 Z=048
Item No.
21ST548
WORM GEARBOX: VTS 049 P R100 F19 U
Item No.
VTS049X1F19
BEVEL GEAR PAIRS M. 3,5-A Z=30/30
Item No.
C35A301