TIMING BELT PULLEYS HTD 14M-170 Z=028
Item No.
14M1728
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Belt Width (mm): | 170 |
Fastening Type: | Pilot Bore |
Number of teeth: | 28 |
Flange: | Yes |
Material: | Blacksteel |
Net Weight (Kg): | 13.8 |
HALF-COUPLING W. SMALL TAPE END HRC280 3525
Item No.
HRCI280
TIMING BELTS 1250 H 150 DEV.3175 Z=250
Item No.
1250H150
TIMING B. PULLEYS TAPER B. HTD 14M-115 Z=030
Item No.
1411030
RAW EDGE V-BELTS AX 93 DEV. 2362
Item No.
AX93