TIMING B. PULLEYS TAPER B. H100 Z=040
Item No.
TH10040
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Bush | 1610 |
Fastening Type: | Bush Seat |
Number of teeth: | 40 |
Flange: | Yes |
Material: | Blacksteel |
Net Weight (Kg): | 2.6 |
HALF-COUPLING W. LARGE TAPE END HRC130 1610
Item No.
HRCE130
DUPLEX SPR. W. HARD.TEETH 3/4X7/16 Z=021
Item No.
PD11T21
SPUR GEAR WITHOUT HUB MOD. 1 Z=085
Item No.
CM26085
POLY V-BELTS 991 L INCHES 39 RIBS 16
Item No.
991L16