MULTIBAND V-BELTS SPC 8000 RIB 7
Item No.
MBSPC80007
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 7 |
Type: | Multiband |
Length (mm): | 8.000 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
WORM GEARBOX: VP 110 P R15 100/112B14 B3
Item No.
VP11015P12
TRIPLEX C/IRON TAPER BORED SPR. 1"X17,02 Z=045
Item No.
GT12045
WORM GEARBOX: VI 063 P R20 U
Item No.
VI06320S01
WORM GEARBOX: VP 075 P R20 90B5 B3
Item No.
VP07520P09