MULTIBAND V-BELTS SPC 7100 RIB 3
Item No.
MBSPC71003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 3 |
Type: | Multiband |
Length (mm): | 7.100 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
STAINLESS STEEL SPROCKETS 3/4X7/16 Z=012
Item No.
PS11X12
WORM GEARBOX: VP 075 P R30 90B5 B3
Item No.
VP07530P09
MULTIBAND V-BELTS SPC 5600 RIB 7
Item No.
MBSPC56007
RAW EDGE V-BELTS XPZ 1962
Item No.
XPZ1962