MULTIBAND V-BELTS SPC 4750 RIB 6
Item No.
MBSPC47506
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 6 |
Type: | Multiband |
Length (mm): | 4.750 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
ADAPTORS FOR TAPER BUSHES 1615
Item No.
ABC1615
STAINLESS STEEL SPROCKETS 1"X17,02 Z=020
Item No.
PS12X20
TRIPLEX SPROCKETS 3/8X7/32 Z=040
Item No.
PT05040
DUPLEX CHAINS 5/8 NICKEL
Item No.
10N2