MULTIBAND V-BELTS SPB 5300 RIB 4
Item No.
MBSPB53004
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 4 |
Type: | Multiband |
Length (mm): | 5.300 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
VARIATOR BELTS 22X8 DEV. 600
Item No.
600VR22X8
SIMPLEX SPROCKETS 8X3 Z=025
Item No.
PS04025