MULTIBAND V-BELTS SPB 4250 RIB 3
Item No.
MBSPB42503
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 3 |
Type: | Multiband |
Length (mm): | 4.250 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
CAST IRON SEMI-COUPLING HUB "A" 55
Item No.
SGMA055
CLASSIC V-BELTS C 236 DEV. 5995
Item No.
5995C236
ELECTRIC MOTOR IE1 112M 4,00KW 4P 400/690V B5
Item No.
M11124004B5