MULTIBAND V-BELTS SPB 3000 RIB 3
Item No.
MBSPB30003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 3 |
Type: | Multiband |
Length (mm): | 3.000 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
CAST IRON SEMI-COUPLING HUB "A" 55
Item No.
SGMA055
SPUR GEAR WITHOUT HUB MOD. 6 Z=038
Item No.
CM34038
WHEELS FOR CONV. AND ELEV. P.50 R.25 Z=008
Item No.
CE17008