MULTIBAND V-BELTS SPB 3000 RIB 2
Item No.
MBSPB30002
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 2 |
Type: | Multiband |
Length (mm): | 3.000 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
RACKS FOR CONTINUOUS MOUNT. MOD.4 30X30X500
Item No.
CR33050
BOLT-ON HUBS FOR PLATE WHEELS
Item No.
MC040
LOCKING SETS SERIE AA 75/115
Item No.
KLAA075
WORM GEARBOX: VP 040 P R100 71B14 B3
Item No.
VP040X1P06