MULTIBAND V-BELTS SPB 2500 RIB 5
Item No.
MBSPB25005
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 5 |
Type: | Multiband |
Length (mm): | 2.500 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
V-BELT PULLEY POLY-V TAPER PL 280-16
Item No.
LT28016
SIMPLEX SPROCKETS 1/2X3/16 Z=010
Item No.
PS07010
BEVEL GEAR PAIRS M. 3,5-B Z=15/45
Item No.
C35B450
V-PULLEYS FOR LOCKING SET SPA 225/1 B.80
Item No.
AK0225180